Blade Length-4140mm 2021 Remove and replace new track assemblies Remove and replaced new sprocket segments Replace equalizer bar outer bearings and seals Replace track roller frame guide Replace telescopic recoil guide blocks Replace gasket/ reseal lift/ hoist cylinder Remove, reseal and refit both lift cylinders Replace gasket/ reseal final drive duo-cone seal 2022 Complete 2,000 hour service Fit new track adjusters both sides Replace carrier rollers Replace equalizer bar bearing

** Full Service History Available ** Includes Clearing Blade ** 3170mm width over tracks, track length 3300m

** Dual Tilt Blade ** Ripper ** Full Service History Available **

Blade Dimensions-12ft width x 1030mm High

Enclosed Air Conditioned Cab ROPS, Ripper. Has had complete rebuild. Service History upon Request.

Quick Hitch, Auxiliary Piping, TOPCON ready, Comes with one bucket only Sale due to end of contract, 6,000hrs warranty. 1500mm bucket, 3.3m wide over tracks,

Width over tracks 3310mm, Length over tracks 4860mm

Circa 2015 Build. Fitted with Twin Post Topcon GPS and tilting bucket.

Contact Person - Daniel Sykes 0478 309 949

500mm track width 2500mm across tracks 3600mm track length Enquiries - Ben Seeley 0499342234

Configuration - tracked, Comes with GP bucket, Enclosed A/C cab, Seat mounted controls, Quick hitch, Auxiliary piping, Safety rails.

* Quick Hitch * Tilt Bucket *, ** For Inspection and Enquiries please contact Daniel Sykes on 0478 309 949 **

fitted with tilting quick hitch, grab attachment, hose burst protection valves, 300,450,600, 1200mm buckets, 2m wide over tracks

Comes with 2x Extra Buckets Bucket 1 - L- 85cm W - 30cm H- 60cm Bucket 2 - L- 85cm W- 40cm H- 80cm Main Bucket- L- 70cm W- 125cm H- 70cm Total Dimensions L- 3.1m W - 2m H- 2.7m Ex-Corporate Rental Asset

Bucket Dimensions:1230mm,590mm 440mm

1200mm & 280mm Wide Buckets

Operating Weight (including operator): 1440 kg - Fitted with the following: • Rubber Tracks • Quick Hitch • Battery Isolator • Backfill / Levelling Blade • Including Attachments; • 400mm GP Bucket • 250mm GP Bucket • 800mm Mud Bucket • Hydraulic Auger • Five Finger Grab • Riper Tyne • Rake • Manuals and Toolbox • Sample images used - photos to be used as a guide only • Lifting/loading not available

Operating Weight: 1000 kg Quick Hitch Fitted with: • Rubber Tracks • Diesel Engine • Battery Isolator • Backfill / Levelling Blade Including Attachments: • 400mm GP Bucket • 250mm GP Bucket • 800mm Mud Bucket • Hydraulic Auger • Five Finger Grab • Ripper Tyne

Needs battery, Not operating, Hours unknown,

Needs battery, not operating, Hours unknown

Needs battery, Not operating, Hours unknown,

Flat battery, Not operating, Hours unknown,

Parts only, Dismantled parts missing, Does not run, Hours Unknown

Parts only, Possible parts missing, Not operating, Hours unknown,

Parts only, Dismantled parts missing, Does not run, Hours unknown,

Parts only, Dismantled parts missing. Does not run, Hours unknown,

Flat battery, Not operating, Hours unknown,

Starts and runs, Advised vehicle needs new clutch,

- open cabin - expandable rubber tracks - swing boom - quick hitch push blade - Bucket with teeth

4 Buckets.Dimensions:720mm,450mm,290mm,190mm

Topcon Ready, Enclosed A/C Cab, Rear Multi Shank Rippers with Spare Wheel Mount. 14' Moldboard, New slide bushes for the blade, New aircon compressor, New batteries.

Machine mass 56300 kg **Stop turn off engine showing** **Low hydraulic oil showing,** Bucket - W 4.0m Depth 1.6m H 1.9m.Total dimensions L 11.4m W 4.0m H 4.15m Handrails. VDO meter next to seat showing 14344 Hours. Loadrite Scales

Contact Person - Daniel Sykes 0478 309 949

Bucket Measurement: L- 2.3m W- 3.4m H- 2.2m Total Dimensions L-10.8m W- 3.4m H- 4.4m

** For Inspection and Enquiries please contact Aidan McCartan on 0419 387 383 **

• Engine Model: YUCHAI 4102T • Power (Kw): 78kw • Number of Cylinder: 4 • Operating Weight: 5500 • Machine Size LxWxH: 6200x2000x2850mm • Wheel Base: 2600mm • Wheel Tread: 1550mm • Tire Size: 16/70-20 • Rated Load (kgs): 2000kg • Bucket Dimensions: Width 2000mm x Depth 670mm x Height 900mm • Dumping Height: 3500mm • Dumping Reach: 800mm • Max – Raising Height 4400mm The Wheel Loader also features the following: • A/C • Cabin Heater • 4 in 1 Bucket • Quick Change • Pallet Fork

• Serial Number: TBA • Operating weight: 3.35t • 2t load capacity • 4x4 Wheel Drive • 4-cylinder Diesel engine, 57hp Fitted with: • Multi-Purpose Bucket • Forklift tynes • Quick hitch • Enclosed Cab • All-Terrain Tyres 20.5/70-16 • Radio

Length 4m. bucket width 1650mm. bucket height 700mm

length 6m. bucket width 2300mm. bucket height 1000mm

Bucket Dimensions:2290mm Width x 990mm High

starts drives, brakes not working

front bucket width 2340mm. rear bucket width 420mm

no 3 point linkage arms supplied, significant oil leak from front diff

GST is NOT applicable on the sale of this item ** For Inspection and Enquiries please contact Tau on 0448 448 424 **

** For Inspection and Enquiries please contact Daniel Sykes on 0478 309 949 **

GST is NOT applicable on the sale of this item

*Dismantled* parts missing

Total Dimensions L- 3.4m W- 1.6m H- 2m

• Weight: 970kg • Load capacity: 400kg • Dimensions: 1740mm (L) x 830mm (W) x 1370mm (H) • 4 in1 bucket - 910mm wide • Engine : Honda GX690 25hp 4 stroke engine Key start ignition Hydraulic system: Hydra Control Joystick • (Italian) Driving System: Danfoss ( Denmark) • Max Operating height: 2545mm • Overall length : 2330 • Oil Cooler • Heavy Duty Rubber Tracks

Attachments include 4 in 1 bucket, Trencher, Grabber, 3 x Auger, Stump grinder, Ezi Loader aluminum ramps.

Comes with Attachments Bucket Model- 054-000-000 Chassis No N2411 Dingo Rotary How Model No R12P Chassis No Rh- A346 Power Hound L- 800cm W- 1m H- 700cm Trencher L- 1.6m W- 1.1m H- 600cm

L 2.8m W 1.0m H 1.4m comes with total of 9 extra attachments on pallets. 1 SB2 rock hammer,3 x hole diggers, 1x bucket, 1x log grip, 1 x flat cube attachment, 2x trench cutters. **was running, stopped and will not re-start., needs attention**

MINI Dumper 2023 - Engine: Briggs & Stratton - Rated Power: 6.5HP/3600rpm - Fuel Type: 92# Petrol - Machine size with Bucket and foot pedal: 2050x880x1300 - Bucket size: 780x380x200 - Machine Weight: 360kg

**2018 CAT 140M Grader PIN#CAT0140MKB9D05152 9539.5 Hrs showing 14 Foot Blade Ripper and Scarifiers** **Full Service History Available **

12ft blade. Starter isolator. Battery isolator.

Ex-Corporate Rental Asset

2.7m High x 2.5m Long x 1.3m Wide

combination smooth drum and multi tyre, rust visible in door and cab roof,

fitted with AS2302C Screed

1000kg load capacity.weight 513kg.

starts & drives

** Full Service History Available ** 3450mm over width, 11100mm over length

• All-Terrain Dump Truck • Wheel Loader Dumper • Serial Number: E210452 • Capacity: 3000 kg • 4-cylinder Diesel engine • Horse Power: 57 • 4x4 Wheel Drive • Enclosed Cab • All-Terrain tyres 20.5/70-16 • Please note Photos to be used as a guide only, sample images used.

• Current Cranesafe report valid until March 2024 Certificate No QLD174207 • Hrs 9,790 • 15 Tonne capacity • 17m Main boom • Mercedes Benz series 900 Diesel Engine • Automatic Transmission • Joystick controls • Weighing System • Clima Air-conditioned Cabin

** For Inspection and Enquiries please contact Aidan McCartan on 0419 387 383 **

• Emulsion spray bar • Emulsion hand lance • Bulk fuel tank and reel • Release agent tank and reel • Wacker plate lifter • Sold UNREGISTERED – Plates removed

GST is NOT applicable on the sale of this item *The cab locks with remote *Key supplied fits ignition only not the cab doors *Previously operated in NT *Fitted with 7/2013 build Ring-O-Matic 1000 High CFM 4000L skid mounted vacuum excavation unit with 3208 hours showing. 6m steel tray, overall length approx 9.3m

MacDonald Johnson Body RT655 Serial Number TS021476 DOM 2013 Right Hand Driver Km's : 185783 Total Dimensions L- 6.2m W- 2.1m H- 2.5m

Total Dimensions L- 5.9m W- 2.3m H- 3.1m No KM Showing on the left hand driver side Sweeper Body Details - MacDonald Johnston Product - VT.605 Serial No - VT9-40 DOM - 02/2010

Aprx total dimensions: length 5.05m, height 2.7m, width 2.55m

Can be used for drinking water.

GST is NOT applicable on the sale of this item

GST is NOT applicable on the sale of this item

Barker extendable trailer. 13.75m closed, 19.8m open.

airbag suspension. 13.6m.

airbag suspension. 13.7m

fully refurbished. spring suspension. 13.3m

spring suspension. 12.3m fully refurbished.

** Full Service History Available **

spring suspension. fully refurbished.

Spider Rims, Drum Brakes, Airbag Suspension, 90mm Turn Table

40 ft container - Has fitted out kitchen which includes the following - Aircon - 3 phase power - Fridge - Sink with taps - Deep fryer - Storage benches/floating storage - Hand sink to wash hands - Commercial fridge and freezer - Commercial stainless steel grill plate & oven Trailer details - Spider rims - Ring Feeder - Spring suspension - Tri axle - VIN KT2279

20 ft container - Has fitted out kitchen which includes the following - Aircon - 3 Phase power - Showers x 3 - Hand sink basin - Washing machine x 2 - Dryer - Storage Trailer details - Spider rims - Spring suspension - Tri axle - 100 KVA Generator - 2000 Litre fuel pod

Steel Fabricated Lifting Frame, A/C Units, Kitchenette, Fixed Tables. NOTE - Water Damage Evident & Fridge NOT included

Steel Fabricated Lifting Frame, 4 x Cubicals, Troughs & sinks. NOTE - Water Damage Evident

• Serial: TBA • Model: RT30 • 1220mm Forks, • Lift Capacity: 3000Kgs, • Maximum Lift Height: 3000mm, • Enclosed Cabin, • 4 Cylinder Diesel Engine,

• Fuel Type: Diesel • Engine: Isuzu, 46KW • Capacity: 3000kg • Mast Type: 3 Stage Mast • Lift Height: 4500mm • Tyne Length 1220 mm • Fuel Type: Diesel • Transmission: Auto • Mast Height: 2.3m • Features: Side Shift, Seat Belts, Flashing Beacon, Suspension Seat, Differential Lock, Maintenance Free Battery • Tyres: Pneumatic Rough Terrain • Toolbox

lift height 4500mm min mast height 3100mm

• Lift: 4.5m • Diesel Engine • Solid Tires • Side Shift • 3T capacity • 1220mm tines

no Gas Bottle

L 4.5m W 1.1m H 2.2m Tyne length - 1.8m.

Last recorded hrs 1042.*Battery Fault*. Tein Length 1070mm.Max Height 4000mm.Max weight 2220kg.Safe Weigh load system.Charger included

*No key* Last known hrs 1528.Alternator faulty.

(Note: Has just been serviced, new filters, new oil) L 4.3m W 1.4m H 2.2m

Enclosed Cab (Missing Door), 3 Stage Mast, Solid Tyres

Spreader Bar, Enclosed Cab (Missing Door), 3 Stage Mast, Solid Tyres

**operational status unknown, NO power, NO key** *tagged out of service* Dimensions for transport - L 2.6m W 1.1m H 2.1m

**operational status unknown, NO power, parts missing ragged out of service** Dimensions for transport- L 2.1m W 1.0m H 2.0m ID plate not legible.

torsion beam suspension, electric brakes, ring coupler, tare approx 4300kg overall length approx 5.5m, 2.7m high, 2m wide. Please Note: This unit starts and idles. we were unable to get it to rev up. missing fuel cap. the unit has been sitting for 2 years and not run. flat batteries. Contact James Daley. Location Manheim Brisbane. Inspections 8:30am to 4:00pm Monday to Friday

Engine starts, 3249 Hours,

Trailer mounted chipper. No key. No hours. Zhang Sheng model ZSJX-1200 DOM 2023 S/N ZS230713598 **Major Mechanical Repairs Required**

Dimensions-7m L x 2.2m W x 2.7m H. Hours display inoperable.

• 4 Cylinder Diesel Engine • Emergency Stop • Single & 3 Phase Outlets • Fork Pockets • Battery Isolator • Lifting point • Sound Insulation • Modern design • Lockable cabinets • Fuel tank lockable • Comes with Manual

• Serial no: TBA • 4 Cylinder Turbo Diesel Engine • Single & 3 Phase Outlets • Emergency Stop • Battery Isolator • Fork Pockets • Lifting point • Sound Insulation • Comes with Manual • Dimensions: 2250mm x 930mm x 1250mm • Weight: 1050Kgs

• Serial: TBA • Make: KOBOLT • Model: KB-26 • 4 Cylinder Diesel Engine • Emergency Stop • Single & 3 Phase Outlets • Fork Pockets • Battery Isolator • Lifting point • Sound Insulation • Modern design • Lockable cabinets • Fuel tank lockable • Comes with Manual • Dimensions: 1860mm x 760mm x 1210mm • Weight Approx. 350kgs

• Model: KB-42 • 4 Cylinder Turbo Diesel Engine, • Single & 3 Phase Outlets, • Emergency Stop, • Battery Isolator, • Fork Pockets, • Lifting point, • Sound Insulation, • Comes with Manual, • Approximate Shipping Dimensions: 2250mm L x 900mm W x 1250mm H,

15Kva No DOM found, operation status unknown, no power, engine does not start. L 170cm W 80cm H 1.0m

3.4m L x 1.1m W x 2.0 m H

Cutting Width: 62” Power: - 24hp Loncin Petrol 4 Stroke Engine - V-twin cylinder, 802cc - Engine Oil Capacity 2.4L Drive: - Dual hydro static drive - Infinitely variable Max. Cutting Speed: 19km/hr Cutting Styles: - Finishing - Optional mulching blades Cutting Blades: 3 Fuel Tank: 28L Start: Electric Cut Height: - Adjustable - 38mm to 127mm Blade Engagement: Manual Clutch Deck: 7-guage fabricated steel ROP: Yes Wheels: - 22” x 10” rear tires - 15” x 6” front tires Weight: 500kg Dimensions: - 2.08x1.91x1.75m

Starts and drives,

Total Dimensions L- 5.7m W- 2.4m H- 2.6m

8 Hammers,2×6- xpb belts,1000rpm PTO speed,1,80m working width,100-120hp

Approximately 900mm jaw length.pin Diameter 100mm.Ear to Ear 420mm.Pin to Pin 590mm

Pin dimensions 70mm. Pin to Pin 520mm. Ear to ear 360mm. Plate dimensions 1270mm x 800mm

Body Weight (incl. chisel) - kg 214, Total Weight - kg 450, Size (LxWxH) (mm) - 1712x328x486, Hydraulic Oil Flow - l/min 50~90, Hydraulic Pressure kg/cm2 - 120~150, Blow Frequency - bmp 400~800 Chisel Diameter mm 75, Applicable Carrier - ton 6~9

This Greatbear Hydraulic Breaker is the attachment for skid steer for demolishing concrete structure, rocks, or pavement purpose. The Greatbear hydraulic breaker is a powerful percussion hammer with a sharp head to split and break the aim. The breaker is also known as hammers, peckers, hoe rams, and hoe rammer for construction and demolition workers. Specification Model Unit 750 Weight kg 375 Length mm 1719 Working Flow Rate litre/min 50-90 Oil Relief Pressure kg/cm2 170 Working Pressure kg/cm2 120-170 Impact Rate bpm 400-800 Chisel Diameter mm ¢75 Hose Diameter inch ‘1/2

Hammer of a 30 ton excavator. Mechanical condition unknown.

Challenge excavator buckets. Location Wagga Wagga NSW

width 1400mm. length 1300mm. height 500mm

Pin dimensions-100mm. Pin to Pin 585mm.Ear to Ear 420mm. Bucket width 555mm

Bucket width 260mm. Pin dimension 25mm.Pin to Pin 95mm. Ear to ear 90mm

cutting width 160mm. boom length 1800mm. hydraulic side shift

To Suit Skid Steer Bucket Capacity: 0.35 Cubic Metres Required Operating Flow: 75 – 140L/m Operating Pressure: 16-21 MPA Shipping Dimensions: 1700mm L x 920mm W x 800mm H Weight: 525 Kgs Model Type 1

Unused Trencher Attachment for Skid Steer Loader • Digging Width: 200mm • Digging Depth : 900mm • Required flow: 50-75 L/Min • Photos to be used as a guide only - Sample images used

Unused 2023 Auger Attachment Set - To Suit Skid Steer • Digging hole diameter 200 - 450mm • Including 9,12,18 inch drills • Required flow 50-75L/Min

Grapple to Suit Skid Steer • 1680mm wide • Operating Pressure: 17-21MPa • Dual Ram • Weight: 210Kgs

2023 Unused Rock Bucket • To Suit Skid Steer • 1830mm wide • Weight: 190Kgs • Sample images used - images to be used as a guide only

Unused Skid Steer Bucket • 550mm H x 1850mm W x 700mm Depth

- Greatbear 10’ Extension Fork Measurements: - Length – 2900mm - Width – 160mm - Height – 70mm

Skid Steer Plate Compactor Description: Size: Length 1832 x Width 775 x Height 709mm Weight: 500KG Working Width: 1832mm

Roller shells of a Ingersoll Rand- SD100.

2 x EVO 200 Desert, Solar Panel Washers.

GST is NOT applicable on the sale of this item

Needs battery, Not operating, Hours unknown,

Needs battery, Not operating, Hours unknown,

Needs battery, not operating, Hours unknown,

Needs battery, Does not run, Hours unknown,