Please note this item will be on display at Agfest. The successful purchaser will need to collect from Agfest, Cressy, Tasmania on Monday 11th May by Appointment. The pallet of extra parts will be available for collection from Manheim Hobart (1200X800X450). history as advised by vendor: this little unit is linked to Tasmania’s iconic 3 Capes Track and to the International Nuclear Test Ban Treaty! This machine was purchased in 2016 as an ex Cat Rental Machine for a one off project in Antarctica. As a Cat Rental machine, it spent its early life on hire with Tasmanian Parks and Wildlife, being flown into remote locations on the Tasman Peninsula to build the tracks and camp infrastructure of the 3 Capes Walk. Australian Antarctic Division purchased it with 500hrs on the clock and prepared it for service in Antarctica for a summer project at Davis, to be again flown out to a remote site to install infrastructure to monitor nuclear explosions in the atmosphere as part of the “Infrasound Project”.

aprx unit dimensions: 4.1m long, 1.7m wide, 2.55m high Please note this item will be on display at Agfest. The successful purchaser will need to collect from Agfest, Cressy, Tasmania on Monday 11th May by Appointment.

Please note this item will be on display at Agfest. The successful purchaser will need to collect from Agfest, Cressy, Tasmania on Monday 11th May by Appointment.

Please note this item will be on display at Agfest. The successful purchaser will need to collect from Agfest, Cressy, Tasmania on Monday 11th May by Appointment.

Please note this item will be on display at Agfest. The successful purchaser will need to collect from Agfest, Cressy, Tasmania on Monday 11th May by Appointment.

vendor advises: will not pass roadworthy due to chassis rust Please note this item will be on display at Agfest. The successful purchaser will need to collect from Agfest, Cressy, Tasmania on Monday 11th May by Appointment.

vendor advises: will not pass roadworthy due to chassis rust

vendor advises: will not pass roadworthy due to chassis rust

vendor advises: will not pass roadworthy due to chassis rust

vendor advises: will not pass roadworthy due to chassis rust. Vendor advises batteries require replacement, aprx truck dimensions: 7.2m long, 2.5m wide, 3m high

aprx unit dimensions: 7.4m long, 2.3m wide, 2.35m high

Hours: 2822. comes with 4in1 bucket, auger drive unit, fork tynes and slasher.

hours: 3252* with 4in1 bucket, Auger drive unit fork tynes and slasher.

• Capacity: 5,200 bu/hr (~130 TPH). Model Year 2024. • Power Requirement: 70 HP PTO • Auger Diameter: 10” • Transport Height: 85.5” • PTO Driven Vacuum System • Cyclone / chaffer screen separation system • 8” full-flow steel exhaust (rotating) • Bin Snake 5000/5200 • Maxflow Aluminum Nozzle Assembly • Pile Driver Base & Pile Driver Extension – 3.5 ft **NEW MACHINE WARRANTY APPLIES THROUGH BUYERS DEALER. **Pre-delivery to be completed by service department prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Hamilton VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

aprx unit dimensions: 3.3m long, 1.6m wide, 2.2m high Please note this item will be on display at Agfest. The successful purchaser will need to collect from Agfest, Cressy, Tasmania on Monday 11th May by Appointment.

**May require service work prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. 1929 HOURS SHOWING. Located Hastings VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

Hours 256. Manual tray lift.*Advised vin,not sighted*

2023 Aitchison AirPro 8140E pasture seeder. 6 metre working width, 40 tynes on 6 inch spacings, front coulters, rear rubber tyred rollers on each wing, 1000 litre seed bin capacity and 1500 litre fertiliser bin capacity, dual product fans, head and hose distribution kit fitted. AVAILABLE FOR IMMEDIATE DELIVERY. **LIMITED NEW MACHINE WARRANTY APPLIES THROUGH PURCHASERS LOCAL DEALERSHIP. **Pre-delivery to be completed by current location service department prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Echuca VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

Recent service work includes; Purchased at 12000 hours New Turbo @ 13 123 hours Starter Motor @ 13 355 hours Alternator @ 13 610 hours New Rear Tyres fitted @ 14 000 hours Throttle Pedal @ 14 111 hours Boom Cylinder Repair 14 265 hours New Exhaust Manifold @ 14 650 hours New Turbo @ 14 750 Back diff rebuild, new brake pistons and discs replaced, all bearings replaced in wheel ends $32k spent. Replaced centre bearings 14 950 hours

Please note this item will be on display at Agfest. The successful purchaser will need to collect from Agfest, Cressy, Tasmania on Monday 11th May by Appointment.

DUXSON FLOPPY FELLING HEAD, MADE BY DONALDSON MECHANICAL IN NEW ZEALAND. THIS HEAD HAS DONE VERY LITTLE USE, IN GOOD WORKIN ORDER AND WAS PREVIOUSLY FITTED TO A CAT 320 - 20 TON EXCAVATOR.

aprx tractor dimensions: 3.8m long, 1.6m wide, 2.55m high, front wheel size 280/70r20, rear wheel size 420/70r28

2021 unused Warrior Master 6 bale feeder. Carries up to six ROUND bales for efficient feeding Self-loading system with twin rear tines – quick and easy operation Simple and efficient loading system – reduces labour time Remote control operation from cabin, plus on-machine controls Rear reversing camera for improved visibility and safety Tandem axle setup – designed to handle large bale capacity Built for high-volume feeding with reliable performance **NO NEW MACHINE WARRANTY APPLIES. **Pre-delivery to be completed by service department prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Hamilton VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

• Model: AD140 Seed Drill. Model Year 2024. • Sowing Rows: 16 • Row Spacing: 150 mm • Working Width: 2.40 m • Transport Width: 2.89 m • Hopper Capacity: 300 L front / 300 L rear • Frame: 100 x 100 x 6 mm RHS • Tyre Size: 235/75 R15 • 425 Coil Tyne (620 mm clearance, 136 kg breakout) • Trailing with hydraulic lift • Weight: Approx. 1.8 t • Power Requirement: 70–90 HP **NEW MACHINE WARRANTY APPLIES THROUGH BUYERS DEALERSHIP. **Pre-delivery to be completed by service department prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Hamilton VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

• Model: 2930D Speedtiller. Model Year 2023. • Working Width: 3.0 m • Tractor Power Requirement: 110–140 HP • Number of Discs: 24 • Weight: Approx. 2,048 kg • Transport Height: 1.35 m • Transport Width: 3.3 m • Linkage: 3-point linkage (D model) • Disc Configuration: Front and rear disc gangs for residue incorporation • Application: High-speed tillage, soil conditioning, residue management **NEW MACHINE WARRANTY APPLIES THROUGH BUYERS DEALERSHIP. **Pre-delivery to be completed by service department prior to intended use. **To be sold as inspected/as per appraisal photos and to be collected from current location by buyer/buyers transport. Located Hamilton VIC. PLEASE CONTACT PATRICK FOX 0439 964 613

**Tractor not included**