brand new unused. shipping damage

1x new ats-t460 mini Skid Steer.

[ATS T460] • Lifting Capacity 840lbs • 23HP • Aircooled • 5.33ft sq Bucket Capacity '827lb Max lifting force • 6km/h travel speed • 12v Electrical System • 3500rpm engine speed

brand new unused. lifting capacity 840lbs. speed 3600 rpm. max torque 2400 rmp. air-cooled. fuel tank capacity 18.2lbs. hydraulic 4 wheel drive

The Skid Steer Bale Squeeze Hydraulic Adjustable Attachment is for anyone moving and stacking large quantities of hay on the farm or ranch. The Bale Squeeze Hydraulic Adjustable hay bale squeezer supports twin cylinders that give it a lifting capacity of 2,400 Lbs. The two cylinders gives the bale squeezer a stronger holding capacity and is able to stack two bales of hay at a time. With the design of this hay bale squeezer, you can pick up wrapped hay bales two at a time without tearing or puncturing the plastic. Bale Squeeze Hydraulic Adjustable bale grabber with universal quick release hitch will fit front end loaders or skid steers with the universal hitch. The ideal tool to handle loading and movement of round hay bales or silage bags. This tool minimizes damage to bales and allows the bales to be stacked better.

[ The Skid Steer Concrete Chutert attachment designed for carrying and placing concrete with your skid steer loader where trucks and large machines cannot go. It is simple, quick and clean to operate. The Concrete Chuter attachment allows you to accurately dispense concrete where you need it without any waste. This attachment is built ruggedly to carry heavy material, take a beating and still operate perfectly. It has a tough hydraulically operated control door with a tight-fitting seal to ensure accurate material delivery. ] • Specifications • Capacity：148 gal • Weight:461 lbs • Length:38.5 in • Length with Extension:68 in • Width:60 in • Height:30 in • Lift capacity Requirement:3,200 lbs

MAD-12-12D [ Our drives are available with a 2" hexagonal output shaft. Our auger is equipped with a high torque drive motor. Auger size 6" diameter auger to fit your job. ] • Direct drive through planetary gear. • Mounting plate, hoses and couplings included. • Various auger bit sizes and styles are available. • Capable of driving up to 36″ bit. • For Light to Moderate Conditions.

brand new unused

brand new unused

brand new unused

brand new unused

brand new unused

brand new unused

MCB-11-48W [ Wolverine Mini Skid Steer Combination Buckets are made of top quality materials and can be made to fit many different brands These buckets give your mini skid steer more versatility and allow you to dig, grade, grapple, doze etc. We offer our mini skid steer buckets in styles smooth, with weld on shank and replaceable teeth or with a removable Toothbar.] • Weight 280 lbs • Overall Height 18 in • Overall width 48 in • Overall Length 30 in • Capacity 4.5 cu ft

brand new unused

brand new unused

brand new unused

MPF-11-2500G [This Mini Skid Steer Pallet Frame is made to fit the Toro Dingo, Vermeer, universal mount system and comes with Class I 42" Long Forks rated to lift 2,500 lbs. Forks are adjustable and can be locked in various positions. Heavy duty backrest can support heavy loads of brick pavers and other materials.] • Weight 950 lbs • Overall Height 30 in • Overall width 30.5 in • Overall Length 50 in • Fork Tines Capacity 2,500 lbs • Fork Tine 42" x 4" x 1.5"

brand new unused

brand new unused

MSG-11-44W [Mini Skid Steer Grapple Bucket is ideal for raking up and pushing debris. The grapples can then be used to grab material, clear, move and load the debris into a dumpster, trailer or dump truck. The shape of the grapple tine makes it easy to roll debris into tight piles if you are planning to burn or dispose of. We use twin 1 1/2" bore by 6" stroke cylinders, rated at 3,000 psi to handle the toughest jobs.] • Weight 250 lbs • Width 44 in • Height 16 in • Cylinders 1-1/2" Bore X 6" • Stroke (Rated to 3,000 PSI) • Material 3/8 in • Bucket side 3/8 in • Cutting Edge 3/8 in • Tine Spacing 2 in

brand new unused

brand new unsed.

brand new unused

brand new unused

brand new unused

PD-12-08D [The Skid Steer Post Driver attachment is a dependable and affordable post driving attachment for operators looking for great value. These breaker style post drivers use a proven nitrogen charged power cell, steel plate frame, and high strength steel domed head to put posts in the ground on pace with any competing attachment. Available in a 1150 lb energy class, this driver operates on skid steer loaders between 13 and 24 GPM hydraulic flow.] • Operating Weight 926 lbs • Length With Tool 51 in • Overall Width (Included D Ring) 49 in • Working Steel Diameter 8.58 in • Deck Width (Overall) 48 in • Impact Energy Class 750 ft lb • Blows Per Minute (variable) 620 - 1150 • Oil Flow Range 11.9 - 21.9 gpm • Operating Pressure Range 1,566 - 2,175 psi • Relief Pressure 2,310 - 2,610 psi • Recommended Machine Carrier Range 7,000 - 15,900 lbs

brand new unused

brand new unused

brand new unused

brand new unused

LDH-PC90 Plate Compactor [Conveniently placed handles. Foldable handle easy for transportation and storage. Open design reduces dirty building. Centrally mounted fully enclosed exciter for an even spread of compactive force over the whole base plate. Heavy-duty shock mounts reduce vibration to the upper.] • Engine Type: Petrol，Zonsen GT200 • Type Of Combustion: Air-cooled,single cylinder,4-stroke. • Centrifugal Force: 15KN. • Vibrating Frequency: 5500VPM. • Max Travel Speed: 75.6ft/min. • Plate Size: 21x18in. • Ship Ping (Package Size) : 26*19*28in.

brand new unused

brand new unused

LDH-TWP80 [ 3 inch semi-trash water pump ] • Engine – GT200 • Displacement : 195cc • Export /Import Diameter : 3in • Fuel Tank Capacity : 2L • Maximum Flow Rate : 50m3/hr • Maximum Head : 30m • Maximum self priming height : 7m • Maximum Power : 4.5kW

brand new unused

brand new unused

[ • Length:20' • Width:20’ • Ridge height: 12-%' • Side-wall height: 10’ • Frame structure:2'-16 GA square steel • Corrugated roof panel ]

brand new unused

2 extentions per set

2 extentions per set

2 extentions per set

2 extentions per set

2 extentions per set

2 extentions per set

2 extentions per set

2 Extensions per set

2 Extensions per set

2 extentions per set

some shipping damage

brand new unusedPFA-11-3300G [The Skid Steer Pallet Fork Hydraulic Adjustable are 58" long Class II are 1 1/2 inches thick, 4 inches wide, completely heat treated. Our forks are completely adjustable and come with side steps to make it easy for you to climb in and out of you machine.] • Weight 473 lbs • Width 45 in • Height 35.5 in • Length 58 in • Fork Rating 4,000 lbs • Mounting Universal Skid Steer • Forks 58 in Long Adjustable With Locks • Side Steps 2 • Rated working pressure 3000 psi • Fork Tines LxWxH 58" x 4" x 1 1/2" Class II

brand new unused

brand new unused

brand new unused

SB-12-72W Screening Bucket [The skid steer screening bucket is ideal for commercial and residential landscaping, farms, industrial uses, beaches and many other applications. It will screen dirt,gravel,sand,demolition debris, large rocks and many other materials. Useful for digging, loading, and carrying materials after unwanted fines have been removed. The simple rugged design results in minimum downtime for service and maintenance.] • Weight 1100 lbs • Overall Height 31.5 in • Overall width 72 in • Overall Length 48.8 in • Bucket Feed Widthy 72 in • Screen Mesh Size 4/5 x 4/5 in (optional) • Bucket Capacity 7/8 cy

brand new unused

brand new unused

[ Our Professional Series Stump Grinder is the choice for arborists, large contractors, landscapers, and maintenance departments. Mounted on a most any brand of skid steer or compact track loader these units are easy to maneuver into compact areas that are difficult or impossible to reach with other types of machines without creating unnecessary damage to property. Ultra strong tungsten carbide teeth aggressively chew through any size stump. Unique bi-directional cutting design creates a more aggressive cutting pattern that takes out even the largest of stumps in no time. Offset cutting wheel allows the operator great visibility. The hydraulic motor powers the 1/2" cutting wheel to an impressive 1,100 rpm, that along with the large 24" diameter cutting wheel and 55 degree swath cuts 8" deep in as little as 2 minutes. It features the ideal combination of maneuverability, power, durability, and simplicity. ]

brand new unused

brand new unused

SBG-13-72W Steering sliding hook [Dual upper grapples open a full 59 inches to maximise the amount of debris held. Lower tines feature weld on tine points to pick up material and debris while leaving dirt behind. Features 2 2”x 10”3000psi cylinders mounted behind the main frame to operate the upper grapples ] • Weight – 671lbs • Overall width – 59” • Opening – 59” • Length – 83.2” • Applicable machine – Sliding loader

[The Skid Steer 6-Way Dozer Blade can handle even the toughest applications. Simple operation and ease of use combines with great vi sibility, making working smart not hard easier than ever before. ] • Weight 960 lbs • Length 37.5 in • Width 84 in • Height 29.89 in • Two-way Swing Angle 30 ° • Two-way Tilt Angle 10 ° • Rated working pressure 2500-3000 psi

brand new unused

brand new unused.

brand new unused.TD-13-36R [Completely transplant trees and shrubbery with the tree spade. This economical attachment is used for a variety of applications. Available for ball sizes from 36" (914 mm) to 48" (1219 mm), the tree spade features 3/8" (9.5 mm) plate with tapered and sharpened edges. Move and place trees, shrubbery, and boulders and dig holes for new trees.] • Weight 260 lbs • Overall Height 20 in • Overall width 45.5 in • Overall Length 41.2 in • Plate 3/8 in • Suitable For Ball Sizes 36"- 48"

brand new unussd. Ball sizs 36"

brand new unused

brand new unused [ • Depth:38 in • Height:20 in • Cutting edge:1" x 6" • Tine Thickness:3/8" • 66" weight 440lbs, Capacity:0.36m³ ]

brand new unused [ • Depth:38 in • Height:20 in • Cutting edge:1" x 6" • Tine Thickness:3/8" • 66" weight 440lbs, Capacity:0.36m³ ]

brand new unused. [ • Depth:38 in • Height:20 in • Cutting edge:1" x 6" • Tine Thickness:3/8" • 72" weight 448lbs, Capacity:0.39m³ ]

brand new unused

brand new unused

brand new unused. [ • Depth:38 in • Height:20 in • Cutting edge:1" x 6" • Tine Thickness:3/8" • 78" weight 480lbs, Capacity:0.42m³ ]

brand new unused

beand new unused

brand new unused. [ • Depth:38 in • Height:20 in • Cutting edge:1" x 6" • Tine Thickness:3/8" • 84" weight 505lbs, Capacity:0.46m³ ]

brand new unused

brand new unused

[ brand new unused.fits all class 1 tractors. standard 2in trailer receiver. length 32in. Height 21in. width 4.7in. easy to move trailer wi tractor bar. ] • Model: TQH-26-01C • Fits all Class 1 tractors – • Standard 2-inch trailer receiver • Heavy duty steel construction – • Includes top and bottom pins • Easy to move trailer with tractor tow bar • Quick and easy installation • Length (from the end of the pin): 32in • Height (bottom pin to top pin): 21in • Width: 4.7in

[ brand new unused.fits all class 1 tractors. standard 2in trailer receiver. length 32in. Height 21in. width 4.7in. easy to move trailer wi tractor bar. ] • Model: TQH-26-01C • Fits all Class 1 tractors – • Standard 2-inch trailer receiver • Heavy duty steel construction – • Includes top and bottom pins • Easy to move trailer with tractor tow bar • Quick and easy installation • Length (from the end of the pin): 32in • Height (bottom pin to top pin): 21in • Width: 4.7in

brand new unused

brand new unused

Specs:1146*250*665mm Adapt Universal Skid Steer Quick Tach to Category 1 & 2, 3 Point Quick Hitch. - Reinforced with 3.25”x3.25” tubular steel. - Lightweight design saving on your loaders lifting capacity. - Adjustable top hook to fit most attachments. - Spring loaded levers to lock pins into place. - No welding or modifications needed. Attaching is simple and quick.

Specs:1146*250*665mm Adapt Universal Skid Steer Quick Tach to Category 1 & 2, 3 Point Quick Hitch. - Reinforced with 3.25”x3.25” tubular steel. - Lightweight design saving on your loaders lifting capacity. - Adjustable top hook to fit most attachments. - Spring loaded levers to lock pins into place. - No welding or modifications needed. Attaching is simple and quick.

[ • Square Drive: 1 " • Air Pressure: 100~170 psi • Weight: 341 lbs • Blade Length: 2.11 in • Anvil Length: 8.85 in • Max Torgue: 2800 ft·1b • Applicable Torque: 1106~1895 ft·1b • No-Load Speed: 4200rpm • Air Inlet: 1/2 in PT • Hose Inner Dia: 1/2 in • SHIPPINGWEIGHT: 39 LBS • Mechanism: inless Hammer ]

brand new unused

brand new unused

brand new unused

brand new unused

[ • Massage technique:Kneading, Massage Automaticmode: Kneading,Massage ,Power, Leisure, Sleep Roller massage area: Head,Neck,Shoulder,Back,Waist,Foot Airbag massage area: Head,Shoulders,Arms,Waist ,Buttocks,Legs,Foot Heating part: Waist,Calf ]

brand new unused

brand new unused

brand new unused

[ 12 Ton Shop Press • Machine size:47’x24.2”x 15.4” • Shipping DlM: 48” x 9.5” x 5.5’ • Machine weight: 83.8 lbs • Shipping weight: 92.6 lbs" ]

brand new unused

[ 20 Ton Shop Press • CE Machine size:55.1”x24.4”x15.8’ • Shipping: 56” x 9.5” x 5.5” • Machine weight: ]

bran new unused

[ • Net Weight: 15.65 LBS • ·Gross Weight: 18.96 LBS • ·Motor Power: 20-40W • ·Motor Speed: 2000-4000r/M • ·Voltage Compatibility: 12V-24V • ·Operating Temperature Range: -35°C to 30°C • ·Thermal Power: 5KW • ·Fuel Consumption: 0.25L/H (min), 0.5L/H (max) • ·Maximum Applicable Altitude: 3000m ]

brand new unused

brand new unused

brand new unused

brand new unused

[ The 40 Gallon 2-Stage Air Compressor delivers reliable compressed air for workshops, garages, and industrial applications. Its two-stage compression system provides improved efficiency and consistent air pressure for operating pneumatic tools and equipment. With a 40-gallon air tank, this compressor offers sufficient air storage for extended tool operation while maintaining stable performance. Built with durable components, it is designed to handle demanding work environments and frequent use. ]

[ • 907 CFM Airflow, 302 ft/s Speed, 4.2HP • ·Leaf Debris, Snow Removal, Construction Sites • ·Backpack Design, Anti-Vibration, Cruise Control • ·Air Purge System, Fuel Drain Tips ]

brand new unuaed

brand new unused

[ • ·907 CFM Airflow, 302 ft/s Speed, 4.2HP • ·Leaf Debris, Snow Removal, Construction Sites • ·Backpack Design, Anti-Vibration, Cruise Control • ·Air Purge System, Fuel Drain Tips ]